Centech 60601 Operations Instructions download pdf (Page 14)

Page 14For technical questions, please call 1-800-444-3353.SKU 98194

MAINTENANCE AND

SERVICING

Procedures not specically

explained in this manual must

be performed only by a qualied

technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the tool

to its “OFF” position and unplug

the tool from its electrical outlet

before performing any

inspection, maintenance, or

cleaning procedures.

TO PREVENT SERIOUS INJURY

FROM TOOL FAILURE: Do not

use damaged equipment. If

abnormal noise or vibration

occurs, have the problem

corrected before further use.

Cleaning and Maintenance

BEFORE EACH USE,1. inspect the

general condition of the tool. Check for

loose screws, misalignment or binding of

moving parts, cracked or broken parts,

damaged electrical wiring, and any

other condition that may affect its safe

operation.

AFTER USE,2. clean external surfaces

of the tool with clean, moist cloth. To

prevent accidents, turn off the tool and

disconnect its power supply after use.

Clean, then store the tool indoors out of

children’s reach.

If the blade has become dirty, use a 3.

blade cleaner (not included) to clean it.

Dirty blades will bind more easily, and

will more often overheat and burn the

wood as it cuts. Overheated blades dull

more easily.

If the Blade has become dull, replace it. 4.

Dull blades will cause increased tear-out

and ragged edges on the cuts.

Occasionally clean the Slides, rotating 5.

Table components and other moving

parts. Use a good quality dry lubricant

(not included) which will not attract dust.

To replace the laser Batteries: Slide the 6.

cover off the laser housing as shown

in the diagram above. Replace the

batteries with two ‘AAA’ batteries and

close the cover. CAUTION! To prevent

injury, position batteries in proper

polarity and do not install batteries

of different types, charge levels, or

capacities together.

7. WARNING! If the supply cord of

this power tool is damaged, it must be

replaced only by a qualied service

technician.

WARNING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments